# Corrosion and Erosion Monitoring

URL: https://www.clampon.com/news/corrosion-and-erosion-monitoring/
Type: ArticlePage
Updated: 2024-10-22

New contracts for corrosion and erosion monitoring

## Preferred Supplier

ClampOn continues to be the preferred supplier of corrosion monitoring and erosion monitoring (CEM) systems, with orders coming in from all over the world. In particular, we have received several orders to major projects in the Middle East. Our production department is now working on close to 70 topside corrosion erosion monitors. It is clear that customers value robust measuring systems with high precision and a long service life.

Combine these facts with ClampOn being a rock-solid company with a clear technological edge and a long-term perspective, and you have a winning combination.

![](https://clampon-production.s3.amazonaws.com/images/ClampOn-Topside-CEM-2-1024x819.original.png)

ClampOn Topside Corrosion Erosion Monitor

## Operating Principle

The ClampOn CEM® Corrosion-Erosion Monitor, is an ultrasonic instrument designed to measure wall thickness loss in pipes over a defined area. It uses active ultrasound to detect the changes in wall thickness relative to the reference values obtained during the installation of the system. Changes to wall thickness is detected by a grid of signal paths, generated by up to thirty-two transducers. Tomography enables us to monitor the actual and minimum wall thickness, and generate a 3D visualization of the monitored section. The coverage area and the accuracy / sensitivity depend on the number of transducers installed / pipe-size. With the right number of transducers up to 100 percent coverage of a given area can be obtained. As little as 0.1% change in wall thickness can be measured in real-time.

![](https://clampon-production.s3.amazonaws.com/images/ClampOn-Topside-CEM-two-rings-1024x576.original.png)

ClampOn Topside Corrosion Erosion Monitor with con

## Lightweight tomography

ClampOn Corrosion and erosion monitoring using lightweight tomography.

There has been a challenge to monitor changes in wall thickness on subsea pipelines. ClampOn uses low power tomography to map the pipe wall and indicate changes in wall thickness.

![](https://clampon-production.s3.amazonaws.com/images/ClampOn-tomography-1024x831.original.png)

The tomography software shows the location and dep

### For further reading:

New Patent for ClampOn Corrosion-Erosion Monitor

[New Patent for ClampOn Corrosion-Erosion Monitor](/news/new-patent-for-clampon-corrosion-erosion-monitor.md)

Corrosion & Erosion Monitor

[Corrosion-Erosion Monitor](/products/corrosion-erosion-monitor.md)

Subsea Corrosion & Erosion Monitor

[Subsea Corrosion-Erosion Monitor](/products/subsea-corrosionerosion-monitor.md)

Installation of Subsea Corrosion-Erosion Monitor offshore India

[Installation of Subsea Corrosion-Erosion Monitor offshore India](/news/installation-of-subsea-corrosion-erosion-monitor-offshore-india.md)

Subsea Corrosion-Erosion Monitor

[Subsea Corrosion-Erosion Monitor article](/news/subsea-corrosion-erosion-monitor-2.md)

_Source:_ ClampOn AS
_Canonical:_ https://www.clampon.com/news/corrosion-and-erosion-monitoring/
_Locale:_ en